In order for plants to develop properly and ensure good flowering, they need to receive a sufficient amount of daylight, which is almost impossible to provide both at home and in greenhouse conditions. Beginning growers often make the mistake of trying to solve a lighting problem in a home greenhouse with regular room lights. But any experienced grower knows that buying an Indoor Grow LED Light Bar for plants is the simplest and most effective solution to the problem.

The most optimal variant of artificial lighting for additional lighting of plants and ensuring their full growth and development in the absence or lack of natural light is special Grow light bars for plants.

What are the Advantages of Grow light bars?

LED (Light-emitting diode – light-emitting diode or light-emitting diode) lamps are not only the most reliable, but also the most economical way of lighting:

Compared to conventional DNAZ/DNAT, grow light bars for plants consume 3 times less electricity. Indoor Grow LED Light Bar do not heat up, while sodium lamps can reach a temperature of 600 degrees, thereby spending more electricity on heating than on light output.

Due to the low power consumption, grow light bars for plants cannot turn off during the day, thereby providing continuous illumination for green pets for about 50 thousand hours.

Despite their small size and weight, Grow light bars for plants have high performance.

Due to the absence of mercury and other harmful compounds, diode lamps are environmentally friendly and do not harm humans and the environment.

What Indoor Grow LED Light Bar for plants to buy?

The choice of Grow light bar depends on what stage of growth your plant is in. If you have any doubts or want to consult, our online consultant is always ready to help you choose a lamp that suits your needs.

Lighting with fluorescent lamps is not able to fill the needs of plants for heat and light, and if you decide to grow indoors, be sure to take care of installing additional devices. In this article, we will tell you which lamps are best for growing plants.

Why is additional lighting needed?

Many beginners in city farming ask themselves: “Why spend money on special Indoor Grow LED Light Bar if you can plant a vegetable garden on a windowsill that is already well lit?” We explain – in nature, plants absorb as much solar energy as they need. At home, especially in winter, due to the short daylight hours, they definitely do not receive enough light.

And what threatens the lack of light? And the fact that under the influence of sunlight, photosynthesis occurs – a process in which carbohydrates form from carbon dioxide and water in greenery – substances vital for the successful development of plants. 

Without Indoor Grow LED Light Bar, photosynthesis slows down: the leaves grow dull, the stems become thinner, flowering weakens – the plant loses its strength and dies. 

How to understand that plants do not have enough light?

It is easy to identify a solar energy deficit. As a rule, the plant itself gives signals:

• leaves grow to a smaller than usual size;
• the green parts of the plant lose color, fade;
• lower leaves turn yellow and fall off;
• The distance between adjacent nodes increases (the plant seems to reach for the light).

What are plant lamps?

The main options for home plant lighting:

1. ESL – energy saving or Indoor Grow LED Light Bar
2. LED – light-emitting diode sources of light energy;
3. HPS – gas discharge lamps.

Let’s consider each of them in more detail and determine the type of lighting that is most suitable for a home greenhouse or garden on the windowsill.

DNAT and MGL lamps (gas-discharge)

This is the most common type of lamp used by city farmers. Unlike other lighting devices, HPS and MHL produce the most intense and useful light for plants, which means they give the most active growth rates and the highest yield per square meter.

MHL – Indoor Grow LED Light Bar for illuminating plants in the early stages of vegetation. They are chosen by city farmers who aim to ensure that plants produce a large number of leaves, branches and roots.

DNAT – lamps for illuminating plants at the flowering stage. They use when the plants begin to bloom to achieve large and dense flowers.

Despite the differences in the principles of operation of these two types of gas-discharge lamps, in practice, only HPS more often uses at all stages of plant development due to their more intense luminous flux compared to MHL.  

Advantages of DNAT:

1. Indoor Grow LED Light Bar is Low price compared to other types of grow lamps;
2. High yield per square meter.

Disadvantages of HPS:

1. They emit large amounts of heat, and therefore must supplement with a good exhaust and ventilation system;
2. They consume a lot of electrical energy, which means they require significant costs for this type of resource;
3. Require regular replacement (usually every 3-5 cycles – depends on the number of hours worked);
4. Due to the high power, they are connected through a ballast (a reflector is needed for optimal performance).

Choose MHL and HPS for growing plants if your goal is to maximize yields in the available space.

Indoor Grow LED Light Bar: ESL lamps (energy saving)

These lamps are also actively used in hydroponic and home horticulture. Compared to all other types of lighting, they have less power, produce less heat and are much cheaper. Feel free to choose ESL if you have little space for growing, plan to get a small crop, or are not yet ready to invest in professional equipment.
ESL advantages:

1. The cheapest lamps for growing plants;
2. You don’t have to worry about temperature fluctuations due to low heat output.

Disadvantages of ESL:

1. Relatively low lighting efficiency;
2. Underestimated plant growth rates and lower yields.

Energy saving Indoor Grow LED Light Bar are an excellent choice for growing seedlings, clones and small plants. Opt for ESL if you are just starting out as a city farmer and looking for the cheapest way to grow plants indoors or in a hydroponic setup.

Lamps LED (light-emitting diode)

I use LED lighting the most. Grow light bars are more efficient in terms of converting electricity into plant-friendly light. They generate less heat and consume less energy, which means they make it easier to control the temperature and reduce electricity costs.
Advantages of LED:

1. They do not require the connection of a separate fan (like HPS) due to the release of a smaller amount of heat;
2. Indoor Grow LED Light Bar do not require the installation of a reflector, due to the formation of a strictly directed beam of light;
3. Consume 4-5 times less electricity than sodium lamps;
4. They have a long service life – up to 50 thousand hours.

Disadvantages of LED:

1. Lower yield compared to HPS;
2. High cost (it is better not to save on LEDs in order to eliminate the risk of buying low-quality analogues with low performance and a high probability of a quick breakdown).

Another reason to buy Indoor Grow LED Light Bar is that there are no additional maintenance costs. There is no need to provide cooling, lighting and purchase of reflectors. Due to the light modular design, Grow light bars are mobile placed on the suspension and are easy to mount. Also, there is no need for special preparation of the premises.